Fibaro Light, Motion and Temperature Sensor

Save 17%

$80 $96.08

Tax included


Note: This product is compatible with Apple Homekit

Monitor an array of conditions with a single device, the FIBARO Z-Wave Motion Sensor (Gen5, U.S.), an upgraded model over the original. Now with Z-Wave Plus certification, this Gen5 Motion Sensor is compatible with all major Z-Wave hubs and controllers. Like the previous version, the sensor is one of the smartest Z-Wave sensors you'll find. The four-in-one wireless multi-sensor serves as a PIR motion detector, light level sensor, temperature sensor, and vibration sensor (accelerometer).

  • Motion, temperature, light intensity, and small tectonic movements sensor - closed in one housing,
  • Battery-powered (up to 2 years)
  • Works in the Z-Wave network
  • Detects even the slightest movement and changes in temperature
  • The unique functionality of an earthquake detector
  • Wireless software update
  • Bluetooth communication
  • 2 years of battery life
  • Activating simple scenes
  • Voice control through Apple Siri®
  • Works with Apple devices with iOS 9 and newer.


Who knew you could have perfect, multi-tasking functionality in a device only slightly larger than a golf ball? This FIBARO Motion Sensor wastes no space in monitoring motion, temperature, light intensity, and even vibration. Once connected to your Z-Wave gateway controller, receive immediate text or email notifications if the sensor detects unexpected movement within your home. Choose a lower motion sensitivity so that pests won’t set off false alarms.


Before mounting the Motion Sensor, include it into your Z-Wave network: 

  1. Open the device’s cover.
  2. Remove the plastic “I’m ready” strip to activate the included battery.
  3. Bring the sensor within direct range of your Z-Wave gateway controller.
  4. Put your controller into inclusion mode. (See your controller’s user manual for specific instructions, as it differs for each brand)
  5. Locate the B-button next to the battery. Press it 3 times quickly. The LED light will turn blue.
  6. The sensor will appear on your controller’s device list. If it doesn’t appear, try waking up the Motion sensor by pressing the B-button 3 times quickly. The LED should be blue to confirm it is in Wake Up mode.

  7. Once successfully connected, close the plastic cover and ensure it is locked securely.

Fibaro Z-Wave Plus Motion Sensor FGMS-001 Inclusion Instructions

Now you’re ready to mount the sensor. Choose a location that you would like to monitor. The sensor performs best when installed in the corner of a room or directly across from a door at least 8 feet above the ground. It is also recommended to avoid sources of heat, direct light, and drafts.

  1. Using the included screw, affix the sensor’s mounting bracket onto a flat surface in the desired location.
  2. Wake up the sensor by pressing the B-button 3 times quickly.
  3. Insert the sensor into its bracket.
  4. Make sure the sensor is operating correctly by ensuring the LED detects motion and is within range of your Z-Wave gateway controller. To test the range, press and hold the B-button until the LED indicator blinks purple. Press and release the button again and wait for the LED indicator to display one of the 4 colors to indicate if the sensor is within your network's range.


  • Z-Wave Frequency: 908.42 MHz
  • Power: 1 x 3.6V CR123A battery (included)
  • Color: White
  • Motion Detection Range: 23 feet
  • Operating Temperature Range: 32-104° F (0-40° C)
  • Temperature Sensor Range: Measures -4°F (-20°C) to +212°F (100°C), with 0.5°F accuracy within 0-104°F operating temperature range
  • Light Sensor Range: 0–32000 LUX
  • Recommended installation: 8 feet above ground
  • Installation: Indoor and Outdoor (under roof, protected from direct sunlight and extreme temperatures)
  • Dimensions: 1.75" diameter
  • Wireless Range: Up to 100 feet


    FIBARO Z‑Wave Plus Motion Sensor FGMS‑001 ZW5 User Manual (PDF)

    FIBARO Z‑Wave Plus Motion Sensor FGMS‑001 ZW5 Quick Start Guide

    Payment & Security

    American Express Apple Pay Google Pay Mastercard PayPal Shop Pay Visa

    Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.

    Estimate shipping

    You may also like

    Recently viewed